Supported screens

Tessera offers 22 board profiles, including the revisions below. Screens that look alike can have different parts inside, so check the model printed on the board or its box. Use the exact model and revision when installing. Current support status and recommendations are maintained in the website's screen catalogue.

ScreenModelDefault tiles per pagePicturesStandby
CYD 2.8 inchESP32-2432S0286NoYes
CYD 2.8 inch, ILI9342ESP32-2432S028 ILI93426NoYes
Guition 3.5 inchJC3248W5354YesYes
Guition 4 inchESP32-S3-4848S0406YesYes
Guition 7 inchJC1060P470, V216YesYes
Guition 10.1 inchJC8012P4A125YesYes
Guition 10.1 inch V2JC8012P4A1 V225YesYes
Guition 10.1 inch V3JC8012P4A1 V325YesYes
Hosyond 4 inchESP32-32E E32R40T6NoYes
M5Stack Tab5 5 inchTab5 ST71219YesYes
Sunton 7 inchESP32-8048S07016YesYes
Waveshare 3.5 inchESP32-S3-Touch-LCD-3.54NoYes
Waveshare 4 inchESP32-S3-Touch-LCD-4B6YesYes
Waveshare 4.3 inchESP32-S3-Touch-LCD-4.39YesNo
Waveshare 5 inchESP32-S3-Touch-LCD-59YesNo
Waveshare 7 inchESP32-S3-Touch-LCD-716YesNo
Waveshare 7 inch BESP32-S3-Touch-LCD-7B16YesYes
Guition 5 inchJC8048W550C_I9YesYes
Guition P4 4.3 inchJC4880P443, pre-v3 silicon9YesYes
Seeed reTerminal D1001reTerminal D100125YesYes
Waveshare P4 86 panelESP32-P4-86-Panel-ETH-2RO6YesYes

The table shows the suggested landscape grids. You can change columns, rows and orientation later in the editor without a firmware build; see Change the grid. These numbers are not fixed tile limits. Pictures means camera pictures, album covers, maps and the media library, which need memory the smaller boards don't have. Standby means the screen can dim and go dark.

Cameras, audio and Assist ​

Every supported ESP32-P4 profile can show live Home Assistant camera pictures. The reTerminal D1001, Tab5 and Waveshare P4 86 panel also have configured audio and can act as media players and Assist satellites with the Voice assistant plugin. The reTerminal and Tab5 support their own cameras through the Screen camera plugin. Hardware testing varies by model; see the capability table.

What the status means ​

  • Stable: the project tried it on real hardware.
  • New: tried, but only a few of these screens are in use yet.
  • Experimental: still needs a full project hardware review. Some profiles have been tried by their contributors; check the model page for what has been confirmed.

On the website, owners report which screens work for them, and a board can be marked community reviewed after a project review and enough qualifying reports.

What every screen needs ​

Use a USB data cable for the first install and a 2.4 GHz Wi-Fi network. Use the power supply specified for your board; some models also support a battery. Hardware support varies by model. See Plugins, Assist and screen hardware for speakers, microphones and built-in cameras. Relays and other peripherals are not automatically enabled just because a board has them. Mains-powered boards, such as the Guition 4 inch on its wall base, should be wired by someone qualified.

Touch ​

The CYD and the Hosyond have a pressure-sensitive (resistive) panel: they ask for a calibration on the first start and want a deliberate fingertip. Every other screen has a capacitive panel like a phone, with no calibration and edge swipes.