Community

Board: Waveshare ESP32-S3-Touch-LCD-7B (1024 x 600, 16 MB flash, 8 MB PSRAM) Versione: Tessera 0.4.86, firmware 0.54.0, ESPHome 2026.9.0 Waveshare 7B running Tessera 0.4.86 (firmw…

By alexcoscia · — · Firmware 0.54.0

Successful installation

A very positive first experience.

It works very well and is responsive. I tested it with 6 pages, 2 columns, and 5 rows. I added weather info, temperature sensors, switches, roller shutters, thermostats, and a lock…

By donny61 · — · Firmware 0.53.0

Successful installation

First screen up and running in no time

First try was garbish all over the screen, so I tried the experimental firmware and that worked direct. I could add all the devices I wanted without problems. Need to get my hand…

By EdwinKort · — · Firmware esp32-2432s028

Successful installation

Perfect

Passt soweit alles!

By namorwoy · — · Firmware 0.52.0

Successful installation

10.1" V3 working

Hi, I tested this on the hardware you didn't have available. Hardware: Guition JC8012P4A1C SKU: 10153002-V3 ESP32-P4 v3.2 (eco7 silicon) CH340 USB-UART flashing interface Firmwa…

By E-M1 · — · Firmware 0.3.22

Successful installation

it's ok

i used for controll all my room with hoepage with go to button. work fine set up it in few minute greet works thanks and don't stop to develop this greet project.

By casettalosine · — · Firmware 0.52.0

Successful installation

works a treat!

flashing was a breeze, real time updates when you make changes are amazing. it makes it so simple!

By markwalkom · — · Firmware 0.52.0

Successful installation

"it just worked"

Everything was working from the start. no try and error like the original OpenHASP config I had on this device. Just ordered a second one...

By sbeier23 · — · Firmware 0.51.0

Successful installation

Guiton 4" up and running

Worked perfectly on this hardware, even from the first versions on.

By rhannink · — · Firmware 0.14.0