10.1" V3 working

Hi, I tested this on the hardware you didn't have available. Hardware: Guition JC8012P4A1C SKU: 10153002-V3 ESP32-P4 v3.2 (eco7 silicon) CH340 USB-UART flashing interface Firmware: Used the JC8012P4A1 V3 build Flashed the factory .bin image over USB UART using esptool Bootloader mode entered with BOOT + RESET Result: ✅ Firmware flashed successfully ✅ Screen boots into Tessera ✅ WiFi connects ✅ Tessera gets an IP address ✅ Home Assistant connection works ✅ Screen manager works correctly One small note: first connection to Home Assistant took some time after boot, but it eventually connected without any changes needed. Thanks for supporting the V3 hardware!