my First screen Is up and running

Board: Waveshare ESP32-S3-Touch-LCD-7B (1024 x 600, 16 MB flash, 8 MB PSRAM) Versione: Tessera 0.4.86, firmware 0.54.0, ESPHome 2026.9.0 Waveshare 7B running Tessera 0.4.86 (firmware 0.54.0) as a wall panel in Italian, 4 pages on a 4x4 grid: climate and lights, media (a phone and an Xiaomi TV box with the cover), and a consumption page with my house meter. What works: display, touch, page swipe (I widened the edge band to 80 px with EDGE_SWIPE_BAND_PX, it works better on this panel), tiles with sliders and controls, graph tile, media cover, page navigation tile. Memory: about 184 KB of internal RAM free after boot and the memory bar at 10 % with 26 tiles. On 0.53.0 it was at 143 % because the draw buffer moved back into the chip; 0.54.0 fixed it (issue #207). Things to know: the board is still marked experimental. After an OTA the touch controller sometimes fails to start (touchscreen marked FAILED in the log). I use a small `interval` check that restarts once if it is failed at 40 s. With 0.54.0 I have not seen it again so far, but I have not tested it for long. Not tested: audio, relays, anything outside the screen.