Guition-ESP32-S3-JC3248W535 support

Hi,

i tinkered a little with my JC3248W535 display. It has the same resolution as the Waveshare 3.5", but provides QSPI display and PSRAM with 16MB storage. So far I could get it to boot and show the new tessera logo 😃 Display works, dimming is fine, the only blocker is the display prompting me to update the add-on because of config problems. https://www.guition.com/esp32-display-module/3-5-inch-esp32s3-display-module

My testing config:

esphome:
  name: esp-screen-test
  friendly_name: "35 Display Test"

esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf
  flash_size: 16MB

logger:
  tx_buffer_size: 2048
  hardware_uart: UART0

text_sensor:
  - platform: template
    name: "Guition screen type"
    entity_category: diagnostic
    update_interval: never
    lambda: 'return {"guition"};'

substitutions:
  FONT_DIR: "https://raw.githubusercontent.com/MaxGramser/homeassistant_espscreen/main/fonts"
  PANEL_W: "480"
  PANEL_H: "320"
  DISPLAY_DPI: "165"
  DEVICE_FRIENDLY_NAME: "Guition 35 Display"
  LVGL_BUFFER_SIZE: "25%"
  BACKLIGHT_FREQUENCY: "150Hz"
  ROTATION_LANDSCAPE: "90"
  GRID_COLS: "2"
  GRID_ROWS: "2"
  GRID_COLS_PORTRAIT: "1"
  GRID_ROWS_PORTRAIT: "3"

external_components:
  - source:
      type: git
      url: https://github.com/MaxGramser/homeassistant_espscreen.git
      ref: main
      path: components
    refresh: 0s
    components: [smart_display]

packages:
  tessera_core:
    url: https://github.com/MaxGramser/homeassistant_espscreen
    ref: main
    file: packages/core.yaml
    refresh: 0s
  hardware:
    url: https://github.com/MaxGramser/homeassistant_espscreen
    ref: main
    file: packages/hardware/esp32s3-rgb.yaml
  cells:
    url: https://github.com/MaxGramser/homeassistant_espscreen
    ref: main
    file: packages/cells/4.yaml
  look:
    url: https://github.com/MaxGramser/homeassistant_espscreen
    ref: main
    file: packages/looks/standard.yaml
  touch:
    url: https://github.com/MaxGramser/homeassistant_espscreen
    ref: main
    file: packages/features/capacitive-touch.yaml
  backlight:
    url: https://github.com/MaxGramser/homeassistant_espscreen
    ref: main
    file: packages/features/backlight.yaml
  camera:
    url: https://github.com/MaxGramser/homeassistant_espscreen
    ref: main
    file: packages/features/camera.yaml
  self_test:
    url: https://github.com/MaxGramser/homeassistant_espscreen
    ref: main
    file: packages/features/self-test.yaml
  snapshot:
    url: https://github.com/MaxGramser/homeassistant_espscreen
    ref: main
    file: packages/features/snapshot.yaml

sensor:
  - platform: adc
    pin: GPIO5
    name: "Battery Voltage"
    id: battery_voltage
    icon: mdi:battery
    entity_category: diagnostic
    attenuation: 12db
    update_interval: 30s
    samples: 16
    filters:
      - multiply: 1.72

spi:
  - type: quad
    clk_pin: 47
    data_pins: [21, 48, 40, 39]

i2c:
  sda: 4
  scl: 8
  frequency: 400kHz

touchscreen:
  - platform: axs15231
    id: ts_touch
    display: my_display
    update_interval: 30ms

display:
  - platform: mipi_spi
    model: JC3248W535
    id: my_display
    data_rate: 40MHz
    update_interval: never
    auto_clear_enabled: false

output:
  - platform: ledc
    id: gpio_backlight_pwm
    pin: GPIO1
    frequency: ${BACKLIGHT_FREQUENCY}
    min_power: 0.01
    zero_means_zero: true

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

api:
  encryption:
    key: !secret esp_screen_test__encryption_key
ota:
  - platform: esphome
    encryption:

It even gets recognized by the software and I can control the screen options, brightness, flipping, but I am not allowed to push a single button to the screen. Is this a limitation of the add-on that only allows supported screens? Or did I mess up something else? 🫨