Hardware testing

We often do not have this board ourselves. Community testing helps establish what actually works. A successful report is evidence for the maintainer to review, not an automatic compatibility claim.

Board details & configuration
Model
JC2432W328C (2.8" CYD capacitive touch variant)
Chip, RAM and flash
ESP32-D0WD-V3 (ESP32), no PSRAM, 4 MB flash
Display and touch
2.8", 240x320, ST7789V (SPI, 20 MHz, backlight PWM on GPIO27), CST820 capacitive touch (I2C: SDA GPIO33, SCL GPIO32, reset GPIO25)
Already tried
I forked the repository and adapted packages/boards/cyd-2432s028.yaml for this board. Switched touch from features/resistive-touch.yaml to features/capacitive-touch.yaml, set display to ST7789V at 20MHz, moved backlight PWM to GPIO27, and configured the CST820 via ESPHome's cst816 platform (I2C on SDA GPIO33 / SCL GPIO32, reset GPIO25, 50ms polling without interrupt pin, calibration 0..240 / 0..320, swap_xy/mirror_x/mirror_y false). Everything works on the actual hardware: display, capacitive touch, backlight dimming, and OTA updates. Happy to test an official board profile/build!
Configuration status
working

1 owner has volunteered to test.

Sign in to volunteer

Discussion 0

Add a comment

Start the conversation

Share an example, ask a question or explain how you would use this.

Add your thoughts, a screenshot or a useful link.

Markdown & basic HTML
Paste or drop images Β· URLs on their own line become previews0 / 10,000
Create your account to join in

We need a verified email address to reach you about your contribution. Your address stays private.

Continue with GitHub

Your draft stays in this tab. Return here after verification.