New boards Wishlist
Hardware testing
We often do not have this board ourselves. Community testing helps establish what actually works. A successful report is evidence for the maintainer to review, not an automatic compatibility claim.
Board details & configuration
- Model
- Guition
- Chip, RAM and flash
- ESP32-P4 LDO GT911 touch
- Display and touch
- 7"
- Already tried
- This is the new version of the 7" Guition V3 It seems to be supported in ESPhome 2026.11.0b7, but not in tessera. Using ESPHome directly I managed to get a colored screen to bve displayed and also got touch working, but I can't use it in Tessera. Audio doesn't seem to be supported in ESPHome as well. Config below. Could you please check if you can take the support over from ESPhome into Tessera? That would be so great, thanks!
- Configuration status
- partial
View shared configuration
# Board: Guition ESP32-P4-M3-Dev
# Definition: definitions/boards/guition_esp32_p4_m3_dev/manifest.yaml
esphome:
name: tablet2
esp32:
variant: esp32p4
flash_size: 16MB
framework:
type: esp-idf
psram:
mode: hex
speed: 200MHz
esp32_hosted:
variant: esp32c6
active_high: true
clk_pin: GPIO18
cmd_pin: GPIO19
d0_pin: GPIO14
d1_pin: GPIO15
d2_pin: GPIO16
d3_pin: GPIO17
reset_pin: GPIO54
slot: 1
logger:
hardware_uart: USB_SERIAL_JTAG
level: DEBUG
api:
ota:
- platform: esphome
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
esp_ldo:
- channel: 3
voltage: 2.5V
output:
- platform: ledc
pin: GPIO23
id: backlight_pwm
light:
- platform: monochromatic
output: backlight_pwm
name: "Display Backlight"
restore_mode: ALWAYS_ON
# I2C bus for the GT911 touch controller (and onboard ES8311 audio codec)
i2c:
sda: GPIO7
scl: GPIO8
scan: true
id: bus_a
# GT911 capacitive touchscreen
touchscreen:
- platform: gt911
id: my_touchscreen
i2c_id: bus_a
display: my_display
reset_pin: GPIO22
interrupt_pin: GPIO21
on_touch:
- logger.log:
format: "Touch detected at X=%d, Y=%d"
args: [ 'touch.x', 'touch.y' ]
# Test font to verify text rendering on V2 panel
font:
- file: "gfonts://Roboto"
id: my_font
size: 40
# Updated display block with text to confirm orientation and resolution
display:
- platform: mipi_dsi
id: my_display
model: JC1060P470-V2
lambda: |-
it.fill(Color(20, 40, 80));
it.print(512, 300, id(my_font), Color::WHITE, TextAlign::CENTER, "JC1060P470-V2 Touch Test");1 owner has volunteered to test.
Sign in to volunteer
Discussion 0
Add a commentStart the conversation
Share an example, ask a question or explain how you would use this.