New boards Wishlist

Waveshare ESP32-S3-Touch-LCD-4.3B Rev. 1.1 support

peterweil62-techSuggested this wish · —

Hello Max,

I would like to request Tessera support for the Waveshare ESP32-S3-Touch-LCD-4.3B, PCB revision 1.1.

I already own this board. The factory demonstration firmware works correctly, including the capacitive touchscreen.

I have installed Tessera Screen Manager 0.4.97 in Home Assistant, but my exact board is not listed in the installation wizard. Only the Waveshare 4.3 and 4.3C variants are available.

My goal is to build a small touchscreen controller for the lighting in our home, using Home Assistant entities and Tessera's visual editor.

I would be happy to test experimental firmware and provide feedback.

Thank you for your work on this project!

Best regards from Germany

Hardware testing

We often do not have this board ourselves. Community testing helps establish what actually works. A successful report is evidence for the maintainer to review, not an automatic compatibility claim.

Board details & configuration

Model: Waveshare ESP32-S3-Touch-LCD-4.3B, PCB Rev. 1.1
Chip, RAM and flash: ESP32-S3-WROOM-1, 512 KB SRAM, 8 MB PSRAM, 16 MB Flash
Display and touch: 4.3-inch IPS LCD, 800 x 480 pixels, RGB interface, capacitive touch (5-point, I2C)
Already tried: The factory demo firmware works correctly, including the touchscreen. Tessera Screen Manager 0.4.97 is installed and running in Home Assistant. However, the ESP32-S3-Touch-LCD-4.3B is not available in the installation wizard. Only the 4.3 and 4.3C variants are listed. No Tessera firmware has been flashed yet.
Configuration status: none

Product details

1 owner has volunteered to test.

Discussion 0

Add a comment

Start the conversation

Share an example, ask a question or explain how you would use this.