New boards Wishlist

Waveshare ESP32-P4-WIFI6-Touch-LCD-10.1 (800×1280, JD9365 + GT9271)

AmazingwunSuggested this wish · —

Please add the Waveshare ESP32-P4-WIFI6-Touch-LCD-10.1. It's very close to the JC8012P4A1 (same P4 + C6 SDIO wiring, 800×1280, 2-lane DSI). Only the display preset, the reset and backlight pins and the touch chip differ, and a working hardware config is attached. Happy to test.

Docs: https://docs.waveshare.com/ESP32-P4-WIFI6-Touch-LCD-X

Hardware testing

We often do not have this board ourselves. Community testing helps establish what actually works. A successful report is evidence for the maintainer to review, not an automatic compatibility claim.

Board details & configuration

Model: Waveshare ESP32-P4-WIFI6-Touch-LCD-10.1 (all-in-one 10.1" from the ESP32-P4-WIFI6 7/8/10.1-inch series), PCB revision unknown
Chip, RAM and flash: ESP32-P4NRW32 (32 MB PSRAM in package), 32 MB flash; ESP32-C6-MINI co-processor over SDIO for Wi-Fi 6 / BLE
Display and touch: 10.1", 800×1280 portrait, MIPI-DSI 2-lane, JD9365. GT9271 touch on I2C (SDA GPIO7, SCL GPIO8), INT/RST not wired. Backlight PWM on GPIO26, panel reset on GPIO27.
Already tried: Tessera 0.4.87 with the JC8012P4A1 and JC8012P4A1 v3 packages, the closest 10.1" P4 boards. The board joined Wi-Fi and Home Assistant, because the C6 SDIO pins are identical, but the screen didn't work and I had to reflash over USB to recover. The display init, touch chip and reset/backlight pins differ from the Guition. A hand-written ESPHome 2026.9.1 + LVGL config runs well on it: display, touch, backlight, Wi-Fi and landscape all work. Two things it needed: PSRAM at hex/200 MHz (the default 20 MHz underruns the DSI and watchdog-resets), and a panel reset on GPIO27, because the P4-NANO-10.1 preset has none and the panel never answers without it.
Configuration status: working

Product details

View shared configuration

# Waveshare ESP32-P4-WIFI6-Touch-LCD-10.1 — hardware only, working on ESPHome 2026.9.1
esp32:
  variant: esp32p4
  engineering_sample: true
  flash_size: 32MB
  framework:
    type: esp-idf
    advanced:
      enable_idf_experimental_features: true

psram:
  mode: hex
  speed: 200MHz   # 20 MHz default underruns the DSI ("can't fetch data from external memory fast enough")

esp32_hosted:     # ESP32-C6 over SDIO, same pins as the Guition JC8012P4A1
  variant: ESP32C6
  type: sdio
  active_high: true
  clk_pin: GPIO18
  cmd_pin: GPIO19
  d0_pin: GPIO14
  d1_pin: GPIO15
  d2_pin: GPIO16
  d3_pin: GPIO17
  reset_pin: GPIO54

esp_ldo:
  - channel: 3    # MIPI D-PHY rail
    voltage: 2.5V

display:
  - platform: mipi_dsi
    id: tft_display
    model: WAVESHARE-P4-NANO-10.1   # JD9365 800x1280 "A" panel
    reset_pin: GPIO27               # carrier holds the panel in reset; the NANO preset drives no reset

i2c:
  - id: bus_a
    sda: GPIO7
    scl: GPIO8

output:
  - platform: ledc
    id: backlight_output
    pin: GPIO26
    frequency: 20000Hz
    min_power: 0.01
    zero_means_zero: true

light:
  - platform: monochromatic
    id: display_backlight
    output: backlight_output

touchscreen:
  - platform: gt911   # Waveshare lists GT9271; ESPHome's gt911 driver runs it
    id: tft_touch
    display: tft_display
    i2c_id: bus_a     # INT/RST not wired, so it polls (0x5D, then 0x14)

# Landscape: lvgl: rotation: 270° puts the camera at the top.
# LVGL rotates touch with it, so the touchscreen needs no transform.

Waveshare ESP32-P4-WIFI6-Touch-LCD-10.1 (800×1280, JD9365 + GT9271)

Hardware testing

Discussion 0

Start the conversation