Seeed SenseCAP Indicator D1S works out-of-the-box

I have installed Tessera on a Sensecap D1S (marked as experimental) and it worked out-of-the-.box.

In order to make the additional sensors from the embedded RP2040 available I have used the following Overrides:

uart:
  - id: rp2040_serial
    tx_pin: GPIO20
    rx_pin: GPIO19
    baud_rate: 115200

packet_transport:
  - platform: uart
    uart_id: rp2040_serial
    providers:
      - name: d1-rp2040    
sensor:
  - platform: packet_transport
    provider: d1-rp2040
    id: voc
    name: VOC Index
    internal: False
    accuracy_decimals: 0
    icon: "mdi:weather-dust"
    device_class: aqi
  - platform: packet_transport
    provider: d1-rp2040
    id: co2
    name: CO2
    internal: False
    accuracy_decimals: 0
    icon: "mdi:molecule-co2"
    unit_of_measurement: "ppm"
    device_class: volatile_organic_compounds_parts
  - platform: packet_transport
    provider: d1-rp2040
    id: temp
    name: Temperature
    internal: False
    accuracy_decimals: 1
    icon: "mdi:thermometer"
    unit_of_measurement: "°C"
    device_class: temperature
  - platform: packet_transport
    provider: d1-rp2040
    id: humid
    name: Humidity
    internal: False
    accuracy_decimals: 1
    icon: "mdi:water-percent"
    unit_of_measurement: "%"
    device_class: humidity